Login
Have you forgotten your password?
Are you a new customer?
Register and get many benefits:
Checking the product availability
Fast reordering & order history
Personal product recommendation
Payment by invoice
Register now
Contact HANSA-FLEX

You have any questions about our online shop or our products?
You can call our customer service at:

(+1) 905-760-2224
Mon-Fri 7:00AM-5:00PM
Sat 8:00AM-12:00PM
Or use our FAQ

There you get answers to the most frequently asked questions.

To the FAQ

What are you looking for?

Enter search term

We are sorry!

Unfortunately no results were found.

  • Air conditioning technology

Air conditioning technology

48 Variants
All filters
External Ø nom.
Internal Ø nom.
Temp. max.
Design
Outer layer
DN*
HEX
Construction
Sealing form 1
Temp. min.
Media
Operating pressure
G1
G2
Connection 2
Application
Connection 1
Standard
Inner layer
Material
Insert
Show all filters
Show fewer filters
Filter
External Ø nom. Internal Ø nom. Temp. max. Design Outer layer DN* HEX Construction Sealing form 1 Temp. min. Media Operating pressure G1 G2 Connection 2 Application Connection 1 Standard Inner layer Material Insert
External Ø nom.
11.7 mm 14.7 mm 17.8 mm 19.8 mm 24.9 mm 31.1 mm 31.3 mm 38.3 mm 45.6 mm
Internal Ø nom.
5.1 mm 7.9 mm 10.3 mm 12.7 mm 15.9 mm 22.6 mm 22.8 mm 29.3 mm 35.5 mm
Temp. max.
120.0 °C 125.0 °C 140.0 °C 150.0 °C 220.0 °C
Design
45° SAE connection  45° SAE external thread, outer cone long pilot for 5400 coupling  AC-CLIP system  connector, O-ring sealed outer thread  for screw fittings  O-ring sealed pipe connection and filling valve (low side), long pilot  O-ring sealed pipe connection and filling valve, long pilot  O-ring sealed pipe connection for flange assembly, long pilot  O-ring sealed pipe connection with flange, long pilot  O-ring sealed pipe connection, long pilot  sealing ring  sealing ring for AC clip nipple 
Outer layer
CR = Moisture absorption values 75% lower than required according to SAE J 2064  EPDM-Schlauchdecke, Ozon- und UV-beständig 
DN*
5.0  8.0  10.0  12.0  16.0  19.0  22.0  25.0  28.0  31.0  35.0 
HEX
15.0 mm 17.0 mm 19.0 mm 27.0 mm 30.0 mm 36.0 mm 41.0 mm 46.0 mm 50.0 mm
Construction
angle 45°  angle 90°  straight 
Sealing form 1
24° outer cone with O-ring  45° inner cone  45° outer cone  flat seal  O-ring seal  O-ring sealed  O-ring sealed pin 
Temp. min.
-40.0 °C -50.0 °C
Media
compressor oils: PAG, ester only for TRITON SE55, SEZ80, Solest oil 35 / 68  coolants: R134a  coolants: R134a, R1234yf, R407C, R404A, R12  oils: POE, PAG, mineral oils, alkyl-benzene 
Operating pressure
35.0 bar
G1
1.1/16″ -14 UNS  1.1/4″ -18 UNFE  3/4″ -16 UNF  5/8″ -18 UNF  7/16″ -20 UNF  7/8″ -14 UNF  7/8″ -20 UNEF  M 13 x 1  M 15 x 1  M 30 x 2  M 36 x 2  M 45 x 2 
G2
1.1/16″ -14 UNS  3/4″ -16 UNF  5/8″ -18 UNF  7/8″ -14 UNF 
Connection 2
filling valve  hose connection  UN/UNF external threads 
Application
assembly oil for air conditioning hoses  coolant (air conditioning technology)  nipple for air conditioning hoses, clip system  pliers for air-conditioning hose clip system  screw ferrule for air conditioning hoses  thermal protection for air conditioning and hydraulic hose lines 
Connection 1
block connection  DENSO compressor flange  filling valve  for flange assembly, long pilot  metric cylindrical inner thread  metric cylindrical outer thread  metric nut thread  pipe connection with flange  UN/UNF external threads  UN/UNF nut threads  UNEF external thread 
Standard
exceeds SAE J 2064 and SAE J 3062  SAE J 2064 
Inner layer
Butyl = R134a effusion values 65% lower than required according to SAE J 2064.  Dual-extrudierter Schlauch für minimale Effusion und maximale Öl- und Kältemittelkompatibilität 
Material
Brass  Chloroprene (neoprene)  NBR - Acrylic-nitrile, butadiene rubber  Stainless steel  Steel 
Insert
polyester braid-support  very strong steel wire braid 
3 Categories
Air conditioning hose protection
Air conditioning hose protection
Air conditioning hoses
Air conditioning hoses
Fittings for air conditioning hoses
Fittings for air conditioning hoses
48 Variants
MAS_AC_SCHELLE
AC SCHELLE 6 Variants

Clamps for AC clip nipple

Application area

coolant (air conditioning technology)

Design

AC-CLIP system
MAS_AC_OR
AC OR 6 Variants

O-ring for AC clip nipple

Design

sealing ring for AC clip nipple
MAS_AC_OR_TUBO_GR
AC OR TUBO GR 4 Variants

O-ring, TUBO air conditioning

Design

sealing ring

suitable for

for following coolants

R134a

R404a
MAS_AC_OR_AOL
AC OR AOL 3 Variants

O-ring for DKOL air conditioning

Temp. min.

-40°C

Temp. max.

125°C
MAS_ACN_AO
ACN AO 8 Variants

AC clip nipples, pipe connection

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

flat seal
MAS_ACN_AOL_45
ACN AOL 45 1 Variants

AC clip nipples, DKOL, angle 45°

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

24° outer cone with O-ring
MAS_ACN_VB
ACN VB 4 Variants

AC clip nipples, straight connector

Application area

nipple for air conditioning hoses, clip system

Connection 2

hose connection
MAS_ACN_AO_90
ACN AO 90 8 Variants

AC clip nipples, pipe connection, angle 90°

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

flat seal
MAS_ACN_AOL
ACN AOL 1 Variants

AC clip nipples, DKOL

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

24° outer cone with O-ring
MAS_ACN_VB_BN
ACN VB BN 2 Variants

AC clip nipples, straight connectors with valve (low side)

Connection 2 + 3

hose connection

Application area

nipple for air conditioning hoses, clip system
MAS_ACN_AO_45
ACN AO 45 8 Variants

AC clip nipples, pipe connection, angle 45°

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

flat seal
MAS_AC_ZANGE
AC ZANGE 2 Variants

Pliers for AC clip

Application area

pliers for air-conditioning hose clip system
MAS_AC_BUEGEL
AC BUEGEL 6 Variants

Clip for AC clip nipple

Application area

coolant (air conditioning technology)

Design

AC-CLIP system
MAS_ACN_HJ
ACN HJ 1 Variants

AC clip nipples, SAE external thread, 45° sealing cone

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

45° outer cone
MAS_ACN_HO
ACN HO 4 Variants

AC clip nipples, connector, O-ring sealed external thread

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

O-ring sealed
MAS_ACN_DF_90
ACN DF 90 2 Variants

AC clip nipples for DENSO compressor flange, angle 90°

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

O-ring sealed pin
MAS_ACN_AO_45_BN
ACN AO 45 BN 1 Variants

AC clip nipples, pipe connection with LP filling valve, angle 45°

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

flat seal
MAS_ACN_DF
ACN DF 2 Variants

AC clip nipples for DENSO compressor flange

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

O-ring sealed pin
MAS_ACN_FO_90
ACN FO 90 3 Variants

AC clip nipples, for flange mounting, angle 90°

Application area

nipple for air conditioning hoses, clip system

Sealing form 1

O-ring seal
Go to top