The product image may differ
Fabrication
avec clapet central de compensation de phases
évacuation externe d'huile de fuite
plage de réglage DBV : 70 - 210 bar
Pressure difference
max. 30 bar (entre les sections)
Construction
2 sections
Please choose a variant
Characteristics
Fabrication
- avec clapet central de compensation de phases
- évacuation externe d'huile de fuite
- plage de réglage DBV : 70 - 210 bar
Pressure difference
- max. 30 bar (entre les sections)
Construction
- 2 sections
Gabarit
- group 0
Customs tariff number
- 84122981
All characteristics
Product description
Notes
Modification to an internal leakoil drain is possible; however, our technical department should always be consulted in individual cases.
To modify the unit, the internal M 6 plug in port “T” must be removed and port “T” must then be closed with a G 1/4″ blind plug.
Description
Division error approx. 3 %.
Equal pressure setting for all sections.
Valves adjustable from 70 - 210 bar, other setting ranges on request.
Configuration of gear flow dividers: qi = Q/z * 1000/n.
Qi = displacement/section [cm³].
Q = total input volume flow [l/min].
Z = number of sections.
N = rotating speed [rpm].
Further information
Product variants
5 Results
Search
Show dimensional drawing
Identifier
p1 = max. working pressure
p2 = max. peak pressure
Column selection
p1 max. (bar)
Flow per element min. (l/min)
Flow per element rec'd (l/min)
Flow per element max. (l/min)
Input volume per section (cm³)
A (mm)
B (mm)
C (mm)
D (mm)
F (mm)
F1 (mm)
H (mm)
Li (mm)
E (mm)
Gewicht (kg)
p1 = max. working pressure
p2 = max. peak pressure