Login
Are you a new customer?
Register and get many benefits:
Checking the product availability
Fast reordering & order history
Personal product recommendation
Payment by invoice
Contact HANSA-FLEX

You have any questions about our online shop or our products?
You can call our customer service at:

+49-421-48907-766
Mon - Fri, 8:00 AM - 7:00 PM
Except sundays and holidays
Or use our FAQ

There you get answers to the most frequently asked questions.

To the FAQ

What are you looking for?

Enter search term

We are sorry!

Unfortunately no results were found.

  • Compressed air technology

Compressed air technology

2,164 Variants
All filters
Max. operating pressure
Sealing form 2
External Ø nom.
Opening pressure
Internal Ø nom.
Temp. max.
Temp. range
Design
Outer layer
DN*
DN
AF
Construction
Sealing form 1
Voltage
Temp. min.
Approval
Operating pressure
Media
Design
Series
BD* at 20 °C
Operating pressure
Connection 4
Connection 3
G1
Size
External pipe Ø
G2
Connection 2
Application
B
Series
Connection 1
Connection
Sealing form 3
Output pressure
Standard
Inner layer
Material
Insert
Show all filters
Show fewer filters
Max. operating pressure
0 - 35 bar, maximum static working pressure (non-pulsating) Max. 10 bar Max. 16 bar -0,99 bar - 15 bar 0 - 10 bar 60 bar 0 - 35 bar 1.5 - 8 bar Max. 40 bar 2.5 - 10 bar (monostable) 1.0 - 10 bar (bistable Max. vacuum 10 bar (external pilot air) Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 60 °C) Max. 12 bar Max. 16 bar (at +20 °C) 0.5 - 10 bar Max. 20 bar 0 - 8 bar max. 63 bar (depending on temperature and nominal size) 2 - 10 bar Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 1 bar (at 170 °C) Dependent on operating temperature; Max. 10 bar (at 20 °C); Max. 2.5 bar (at 90 °C) max. 8 bar 2.5 - 10 bar Max. 25 bar max. 250 bar brass, max. 400 bar steel/stainless steel max. 70 bar (depending on temperature and nominal size) 0.5 - 60 bar 1 - 10 bar 2,5 - 10 bar (monostable) 1,0 - 10 bar (bistable) vacuum up to 10 bar (external pilot air) 2.5 - 10 bar; Max. vacuum 10 bar (external pilot air) 2.5 - 7 bar See table. All values referred to a medium temperature of 50 °C (static working pressure) -0,99 bar - 20 bar 0.5 - 12 bar 1 - 35 bar and rough vacuum Liquidscolon 40/32 bar depending on the port size; Gascolon max. 5 bar (MOP 5) Max. 12 bar, maximum static working pressure (non-pulsating) Max. 15 bar Max. vacuum 10 bar max. 40 bar (to DN 32); max. 25 bar (from DN 40); max. 16 bar (from DN 65) max. 64 bar 0,2 - 50 bar 10 bar 2.5 - 8 bar DN 15 - DN 32colon max. 40 bar; DN 40 - DN 50colon max. 25 bar Max. 28 bar max. 14 bar max. 16 bar for valves with cutting ring connection; max. 4 bar for valves with pipe thread max. 160 bar (G 3/8, G 1/2); max. 100 bar (G 3/4, G 1); max. 60 bar (G 1 1/4, G 1 1/2); max. 40 bar (G 2) max. 18 bar max. 63 bar min. 0,35 bar; max. 8,5 bar 0 - 16 bar 0,2 - 26 bar 0.5 - 20 bar 0.99 - 20 bar 15 bar (12 bar at G 1) 16 bar 2 - 16 bar 2 - 25 bar 2.5 - 10 bar (monostable) 1.0 - 10 bar (bistable) Max. vacuum 10 bar 4.5 bar 5 bar DN 15 - DN 50colon max. 40 bar; DN 65 - DN 100colon max. 16 bar Max. 16 bar; 13.5 x 9.5 mm hosecolon max. 12 bar Max. 24 bar Max. 25 bar (on stem) Max. 25 bar (on thermowell) Max. 6 bar (copper alloy), Max. 25 bar (stainless steel) Max. 6 bar (on thermowell) Max. 9 bar max. 10 bar (to the temperature +20 °C); max. 7 bar (at temperature +40 °C); max. 5 bar (at temperature +60 °C) max. 11 bar max. 12 bar (K-07100622); max. 20 bar (K-07100623) max. 200 bar max. 400 bar (at 20 °C); max. 250 bar (at G 1 - 20 °C) max. 55 bar (depending on connection size and temperature) max. 70 bar (Depending on Temperature) min. 0,0 bar; max. 15,0 bar min. 2 bar; max. 6 bar min. 4 bar; max. 16 bar
Opening pressure
0.2 bar 0.25 bar 0.27 bar 0.3 bar 0.35 bar 0.38 bar 0.4 bar 0.45 bar 0.5 - 1.0 bar 0.5 bar 0.55 bar 0.6 bar 0.65 bar 0.7 bar 0.75 bar 0.8 bar 0.83 bar 0.9 bar 1.0 - 4.0 bar 1.0 bar 1.1 bar 1.2 bar 1.25 bar 1.3 bar 1.4 bar 1.5 bar 1.6 bar 1.7 bar 1.75 bar 1.8 bar 1.9 bar 10.0 - 18.0 bar 10.0 bar 10.1 bar 10.2 bar 10.3 bar 10.4 bar 10.5 bar 10.6 bar 10.7 bar 10.8 bar 10.9 bar 11.0 bar 11.2 bar 11.3 bar 11.4 bar 11.5 bar 11.6 bar 11.7 bar 11.76 bar 11.8 bar 12.0 bar 12.1 bar 12.2 bar 12.3 bar 12.4 bar 12.5 bar 13.0 bar 13.2 bar 13.3 bar 13.5 bar 13.8 bar 14.0 bar 14.2 bar 14.3 bar 14.5 bar 14.7 bar 14.8 bar 15.0 bar 15.1 bar 15.2 bar 15.3 bar 15.4 bar 15.5 bar 15.6 bar 15.7 bar 15.8 bar 16.0 - 32.0 bar 16.0 bar 16.5 bar 16.8 bar 16.9 bar 17.0 bar 17.1 bar 17.5 bar 17.6 bar 18.0 bar 18.5 bar 18.9 bar 19.0 bar 19.1 bar 19.4 bar 19.5 bar 19.6 bar 19.7 bar 19.8 bar 2.0 bar 2.1 bar 2.2 bar 2.3 bar 2.4 bar 2.5 bar 2.6 bar 2.7 bar 2.8 bar 2.9 bar 20.0 bar 20.5 bar 20.8 bar 21.0 bar 21.5 bar 22.0 bar 22.1 bar 22.5 bar 22.7 bar 22.8 bar 23.0 bar 23.1 bar 23.2 bar 23.4 bar 23.5 bar 24.0 bar 24.5 bar 25.0 bar 25.2 bar 25.5 bar 26.0 bar 26.5 bar 26.6 bar 27.0 bar 27.2 bar 27.5 bar 27.6 bar 27.9 bar 28.0 bar 28.5 bar 28.6 bar 29.0 bar 29.4 bar 29.5 bar 3.0 - 7.0 bar 3.0 bar 3.1 bar 3.2 bar 3.3 bar 3.4 bar 3.5 bar 3.6 bar 3.7 bar 3.8 bar 3.9 bar 30.0 - 60.0 bar 30.0 bar 30.5 bar 30.8 bar 31.0 bar 31.5 bar 32.0 bar 32.5 bar 33.0 bar 33.3 bar 33.5 bar 33.7 bar 34.0 bar 34.1 bar 34.5 bar 35.0 bar 35.5 bar 36.0 bar 36.3 bar 36.4 bar 36.5 bar 36.8 bar 37.0 bar 37.5 bar 38.0 bar 38.5 bar 39.0 bar 39.5 bar 4.0 bar 4.1 bar 4.2 bar 4.3 bar 4.4 bar 4.5 bar 4.6 bar 4.7 bar 4.8 bar 4.9 bar 40.0 bar 40.5 bar 41.0 bar 41.5 bar 42.0 bar 43.0 bar 43.4 bar 43.5 bar 44.0 bar 44.8 bar 45.0 bar 46.0 bar 47.0 bar 47.5 bar 48.0 bar 5.0 bar 5.1 bar 5.2 bar 5.3 bar 5.4 bar 5.5 bar 5.6 bar 5.7 bar 5.8 bar 5.9 bar 50.0 bar 6.0 - 12.0 bar 6.0 bar 6.1 bar 6.2 bar 6.3 bar 6.4 bar 6.5 bar 6.6 bar 6.7 bar 6.8 bar 6.9 bar 7.0 bar 7.1 bar 7.2 bar 7.3 bar 7.4 bar 7.5 bar 7.6 bar 7.7 bar 7.8 bar 7.9 bar 8.0 bar 8.1 bar 8.2 bar 8.3 bar 8.4 bar 8.5 bar 8.6 bar 8.7 bar 8.8 bar 8.9 bar 9.0 bar 9.1 bar 9.2 bar 9.3 bar 9.4 bar 9.5 bar 9.6 bar 9.7 bar 9.8 bar 9.9 bar
Design
After having suction pressure Aluminium bracket Aluminium flat jacket Angle connector with wall connecting plate Anodised aluminium Ball seat valve (ball in brass seat) Blanking screw with hexagon socket Blanking screw, with hexagon head Brass sleeve for claw coupling with brass seal. Bulkhead connector Cap coupling Centrifugal filter Centrifugal filter membrane pressure regulator with relieving, fog lubricator Clamping ring Claw hose coupling Claw inner thread coupling Claw outer thread coupling Compressed air tank Connecting fitting Connecting reducing fittings Connection sockets Connector Counter nut Diaphragm pressure regulator with relieving Diaphragm pressure regulator with relieving, centrifugal filter Diaphragm pressure regulator with relieving, centrifugal filter, mist lubricator Digital Flow Switch fiber filter for bulkhead mounting Hose ring for claw coupling with brass seal MODY hose coupling MODY inner thread coupling MODY outer thread coupling Operated by secondary pressure Pipe sockets Plug in connector Pneumatic actuators, in double- or single acting version Pneumatic actuators, in double- or single acting version, with integrated end-position feedback Pneumatic, double-piston, part-turn actuator, double-rocker principle PNP poppet valve, spring-loaded pre-assembled Precision Digital Pressure Switch for excess pressure Quick release coupling plug Quick release coupling plug, DN 7, 2 Quick release coupling sleeve Reducing adapters Reducing connecting fitting Reducing connecting socket Replacement chain for sealing claw coupling Retaining screw for claw coupling with brass seal. Return bends Rocker mounted on pin Rotating claw hose coupling Rotating claw inner thread coupling Rotating claw outer thread coupling Rubber ring for claw couplings Rubber ring for MODY couplings Screw-in connectors Screw-in sockets Screw-on connector Sealing plugs for connectors Spring-loaded diaphragm (NBR) Spring-loaded diaphragm (NBR); Spring-loaded piston (10 to 70 bar versions) Spring-loaded diaphragm (UR); Spring-loaded piston; (10 to 70 bar versions) Spring-loaded, non-return diaphragm valve with adjustable opening pressure stroke adjustment screw Support bushes Tube to hose connector Union nut with plastic screw cap with rubber foot with test connection with union nut
Media
aging resistant in oxygen and ozone Air Air and nitrogen Air or neutral gases (≤ 50 μm filter specified) Air or neutral gases, filtered 50 μm lubricated or unlubricated Air, neutral gases, filtered Air, neutral gases, water, oil Cold and hot water, oils Compressed air Compressed air and all gases or liquids that are compatible with the materials Compressed air and general hydrocarbons Compressed air containing oil mist Compressed air, neutral gases Compressed air, non-corrosive gases Compressed air, non-corrosive gases, non-flammable gases Condensate (emulsion) Drinking water Drinking water, nitrogen, compressed air, non-aggressive liquids dry, oil-free air and non-aggressive gases Filtered (50 μm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. Filtered, unlubricated compressed air Filtered, unlubricated or lubricated compressed air. If lubrication is used, it must be continuous. Fine-filtered (5 μm), unlubricated compressed air, neutral gases fluid media Grease inert gases, e.g., N2/CO2 Micro-filtered, unoiled compressed air (0.01 μm) Mineral oil Non-aggressive gases. dry, oil-free air Only for clean compressed air Propellants resistant against aqueous acids, alkalis and salts and a variety of solvents resistant to aliphatic hydrocarbons and most lubricating oils resistant to aqueous acids, alkalis and salts resistant to hydrolysis and microbes Town gas, liquid gas, methane gas Vacuum Water Water / steam, salt water, salt water, ester, ketone, alkali, caustic soda, sodium hydroxide. Not recommended for hydrocarbons Water and ethylene glycol aqueous solution (having viscosity max. 3 mPa · s [3 cP]) ölnebelhaltige Druckluft (RMA Class A)
Design
Bourdon-tube pressure gauge acc. to EN 562 Bourdon-tube pressure gauge for precision measurements Bourdon-tube pressure gauge in standard design Bourdon-tube pressure gauge with parallel male connector and two separate measuring systems Bourdon-tube pressure gauge, CrNi steel type Bourdon-tube pressure gauge, CrNi steel type, all-stainless steel Bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing) Bourdon-tube pressure gauge, standard design, mounting ring Calibration, testing and service unit Capsule-type pressure gauge Chromium plated sheet steel contact type 821.21 Diaphragm pressure gauge in robust design or for chemical applications Glycerine-filled Bourdon-tube pressure gauge Glycerine-filled bourdon-tube pressure gauge, CrNi steel type Glycerine-filled Bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing) Plunger rod with integrated vacuum guide Pre-wired rack and pinion Robust Bourdon-tube pressure gauge Robust Bourdon-tube pressure gauge with electrical contact (magnetic spring contact) Spring plunger with high-strength steel rodl, guide sleeve and lower damping spring Steel chrome plated or black or with triangular bezel Type "CA" = ground cover with threaded pin - swivel design Type "CM" = ground cover with threaded pin round - swivel design With male connector or welded connection on the pressure tap side with pressure gauge with pressure gauge and silencer with pressure gauge and silencer, angled with pressure gauge and with high performance muffler with pressure gauge and with high performance muffler, angled with switching function display unit
Series
External pipe Ø
Application
B
102.6 mm 104.0 mm 107.8 mm 108.0 mm 108.5 mm 109.0 mm 109.5 mm 110,0 mm 111.5 mm 111.6 mm 112.0 mm 112.5 mm 114.0 mm 114.8 mm 117.8 mm 119,0 mm 122.0 mm 122.8 mm 123.5 mm 124.0 mm 126.0 mm 127.0 mm 128.5 mm 129.5 mm 131.0 mm 132,0 mm 133.5 mm 134.0 mm 134.1 mm 136.3 mm 136.6 mm 136.8 mm 137.0 mm 137.8 mm 138.1 mm 138.7 mm 139.0 mm 140.5 mm 141.0 mm 142,0 mm 142.5 mm 142.8 mm 143.0 mm 144.0 mm 144.5 mm 144.7 mm 145.1 mm 145.9 mm 147.0 mm 147.6 mm 148.0 mm 149.5 mm 150.0 mm 150.3 mm 151.5 mm 152.0 mm 152.1 mm 152.5 mm 153.0 mm 154.0 mm 155.0 mm 156.0 mm 157.0 mm 158.0 mm 160.0 mm 161,0 mm 162.0 mm 162.3 mm 163.4 mm 163.5 mm 164.0 mm 165.0 mm 165.5 mm 166.6 mm 167.0 mm 167.8 mm 168.0 mm 168.2 mm 169,0 mm 169.5 mm 170.0 mm 171.0 mm 175.0 mm 177.0 mm 177.7 mm 178.5 mm 179.5 mm 180.0 mm 180.8 mm (185.8 mm)* 181.0 mm 181.3 mm 181.8 mm 182.6 mm 182.7 mm (187.7 mm)* 182.8 mm 183.0 mm 183.7 mm 184.0 mm 184.5 mm 185.0 mm 185.5 mm 186.5 mm 187.0 mm 188.0 mm 188.5 mm 189.5 mm 190,0 mm 191.0 mm 191.5 mm 192,0 mm 192.1 mm 193,0 mm 194.0 mm 195.0 mm 196.0 mm 196.7 mm 197.0 mm 198.2 mm 198.6 mm 200.8 mm 201,0 mm 202.0 mm 203,0 mm 204.0 mm 205.0 mm 206.0 mm 208.2 mm 21,0 - 28,0 mm 210.0 mm 210.5 mm 213.0 mm 213.5 mm 214.5 mm 216.0 mm 217.0 mm 220.0 mm 223.4 mm 224.0 mm 225.0 mm 225.5 mm 226.0 mm 227.9 mm 228.0 mm 228.5 mm 229.0 mm 230.5 mm 232.5 mm 233.0 mm 234.0 mm 236.2 mm 240.0 mm 240.5 mm 242.0 mm 243.0 mm 246.0 mm 246.3 mm 247,0 mm 248,0 mm 25.0 mm 250.0 mm 252.5 mm 254.0 mm 255.0 mm 256,0 mm 257.0 mm 260.0 mm 261.0 mm 262.0 mm 264.0 mm 266.4 mm 266.8 mm 269.0 mm 270.4 mm 270.5 mm 273,0 mm 274.0 mm 280.5 mm 281.5 mm 282.8 mm 284.0 mm 285.0 mm 29.0 mm 294.0 mm 296.5 mm 299.0 mm 299.4 mm 302.0 mm 305.8 mm 307.7 mm 313.4 mm 316.0 mm 322.9 mm 323.0 mm 324.3 mm 329.0 mm 343.0 mm 359.0 mm 36.0 mm 361.0 mm 363,0 mm 376.0 mm 379.0 mm 38,0 - 48,0 mm 381,4 mm 381.0 mm 381.8 mm 382.8 mm 385.0 mm 39,5 - 49,5 mm 392.0 mm 40.0 mm 419.0 mm 44.0 mm 452.0 mm 454.6 mm 46.5 mm 47,5 - 60,5 mm 48.0 mm 49,0 - 62,0 mm 51.0 mm 52.0 mm 54.0 mm 54.2 mm 56.0 mm 57.6 mm 60.0 mm 65.5 mm 66.0 mm 67.0 mm 68.0 mm 70.0 mm 71.6 mm 72.0 mm 72.5 mm 75,4 - 90,0 mm 75,9 - 90,5 mm 75.0 mm 76,0 mm 76.3 mm 77.5 mm 78.0 mm 80.0 mm 80.5 mm 81.0 mm 81.4 mm 85.0 mm 87.5 mm 89,0 mm 9.0 mm 92.0 mm 93.0 mm 94.0 mm 94.8 mm 97.3 mm 98.0 mm
Material
(HSS) Steel Acetal copolymer Acetal copolymer body; nitrile O-ring Acetalpolymerisat (POM) Aluminium Aluminium handle Aluminium housing Aluminium surface treated Aluminium UNI 9006/1 Al Mg 0,5 Si 0,4 Fe 0,2 Aluminium, unpainted Anodised aluminium / technopolymer ASTM F 36 J (NBR with aramid fibers) Black malleable iron B350-10, design symbol A black steel ST 37-2 Brass Brass ball, hard chrome-plated Brass conical valve Brass housing Brass with a bare metal surface carbon steel Cast iron Cast-iron Copper Copper alloy, CrNi-Steel 1.4571 Coupling, unlocking sleeve, valve body and brass valve Elastomer O-ring double seal Feder: Edelstahl Galvanised steel Galvanised steel / brass Gasket: NBR Gewindestück: Stahl verzinkt hardened nickel plated steel hardened zinc plated steel Hood :aus Messing, Gehäuse aus Kunststoff (PA) Hot pressed brass Housing: Galvanised steel Hülse: Stahl verzinkt iron Kugel: Edelstahl Malleable cast iron coupling head / Steel nozzle Malleable iron NBR - acrylonitrile butadiene rubber nickel plated iron Nickel-plated brass Nickel-plated brass (banjo bolt), brass (ring nipple) Nickel-plated steel, brass Ohasil Perbunan Perfluoroalkoxy alkane (PFA) Plastic Plastic Grivory (PA 61/XT) Plastic, Nickel plated brass Polyamid (PA) Polyamid PA 12, hard (according to DIN 73378) Polypropylene (PP) Polyurethane (PUR) Polyurethane foam PTFE (polytetrafluoroethylene) PTFE ball seal PVC with integrated special fabric Rubber sealing: FKM (FPM) sealing: PTFE sealing: Teflon/NBR Silicone Springs, snap ring and pins from stainless steel Stainless steel stainless steel 1.4305 Stainless steel 1.4401 Stainless steel 1.4401/1.4408 Stainless steel 1.4404 stainless steel 1.4404 (AISI 316L) Stainless steel 1.4408 Stainless steel 1.4571 Steel steel (FeP04), plastic coated Steel / composite material Steel handle with yellow plastic protection Steel housing powder coated, perforated sheet galvanized steel, polyester felt discs Steel or Stainless steel Surface coated aluminium Technopolymer to 10 bar: plastic Grivory (PA 61/XT) bzw.; to 16 bar: Alu black eloxed Ventil: Zink-Druckguss (Zamak) Vulcanised fibre Zinc Zinc plated steel ST 37-2
9 Categories
Show all categories
2,164 Variants

Absolutely tight: Pneumatic components from HANSA-FLEX

Using air as a medium to transmit force has a great many advantages: it is available free-of-charge, in unlimited quantities and is easy to store. However, it requires a lot of energy to put the air under pressure using compressors. The airtightness of the system is the deciding factor in how economically a compressed air system can be operated. It all comes down to the quality of the pneumatic components. HANSA-FLEX, as an expert with extensive know-how in fluid technology, offers a comprehensive, high-quality product portfolio. From air blast guns to hose collars, plug-in couplings to maintenance units, valves and cylinders – we have virtually everything. HANSA-FLEX’s range of compressed air connection technology includes over 15,000 components and tools. In addition to various hose types and pipeline systems, the range also includes couplings and connectors among the most important connection technology components. They can be supplied as thread or elastomer sealing types to suit the customer’s requirements, and in various metal and plastic versions to cover a wide range of applications.

Go to top